Other Air Filters
The oil filter made from high-accurate filter paper or glass fiber, is designed to remove particles, impurities from the engine oil of air compressor, thereby maintaining the safe operation. It should be replaced after having been used for about 2,000 hours. Otherwise, it will give rise to the damage to the air compressor. Additionally, a clogged filter can quickly prevent your engine from being properly lubricated, and it will affect the oil quality.
The new air compressor that has been operated for 500 hours should change new oil filter with the dedicated wrench. Prior to the installation of the new filter, it is much better to add the screw oil, and then screw the holder by hand to seal the filter element. The maintenance of the oil filter can prolong the service life of the air compressor.
1. The filter should meet the filter fineness requirement of the air compressor. It must be able to prevent the impurities from getting into the system.
2. It must be strong enough to resist the pressure caused damage.
3. It should be available with large flow capacity but low pressure loss.
4. The easily cleaned and replaced filter is required.
When installing, lubricate the sealing gasket with oil. The use of inferior or unmatched lubricating oils will speed up the generation of carbon deposition, thus shortening the service life of the filter.
Our product has been strictly inspected and tested. It is available with numerous types, separately used to Ingersoll Rand screw air compressor, Atlas Copco screw air compressor, Sullair screw air compressor, etc. Also, we can customize the filter for you.